Gypsum adhesive 10 kg

Gypsum adhesive is a dry mix based on natural gypsum and mineral filler. It contains components that make the mixture plastic, easy to work with and characterized by good adhesion to the substrate and to plasterboards. Application: - Gypsum adhesive T is used to stick plasterboards and gypsum decorative panels to internal walls made of ceramic bricks, silicone bricks, concrete and cellular concrete. A method of preparing: Sprinkle the T gypsum glue evenly into the water (use approx. 0.5 liter of water for 1 kg of glue) and leave it to soak for 3-5 minutes. Then mix manually or mechanically until a homogeneous mass is obtained. The mortar must be used up in its plastic state within no more than 45 minutes. The unused mortar after starting the setting is not suitable for remixing with water and should be discarded because it shortens the setting time of the next grout. Directions for use: Plasterboards and decorative gypsum panels are fixed in spots on patches distant from each other by about 30-35 cm. When fixing the boards to even substrates, the adhesive can also be spread using a notched trowel (with a tooth thickness of 8 mm). Substrate preparation: The substrate should be stable and free from dust, paint residues and other dirt. Smooth concrete surfaces - poured or prefabricated, should be primed with WELDPRIMER Primer. Highly absorbent substrate, eg aerated concrete, should be primed with the WELDPRIMER STRONG priming emulsion.